The 2017 Mercedes-Benz G550 4x4² (European model shown)
The 2017 Mercedes-Benz G550 4×4² (European model shown)

Mercedes-Benz G550 4×4² to roll out in US market by early 2017

New for the 2017 model year, the Mercedes-Benz G550 4×4² will join Mercedes-Benz family of SUVs in the United States. The 4×4² is the most capable G-Class ever, boasting innovative portal axles, three locking
differentials, a ground clearance of more than 17″ and a 4.0L Biturbo V8. The G550 4×4² will be available in US dealerships beginning in early 2017.

Since development of the G-Class began in 1972, the military–turned-passenger- vehicle has been hand-built in Graz, Austria. The name Gelaendewagen translates literally to “off road vehicle.” Since 1979, more than 250,000 vehicles have been delivered to customers around the globe.

In the United States, the G550 4×4² joins the already-robust G-Class lineup, which features the 416 hp G550, the 563 hp AMG G63, and the 621 hp AMG G65, notably featuring a 6.0-liter V12 Biturbo engine producing a massive 738 lb-ft of torque.

Following in the footsteps of the AMG G63 6×6 (not available in the US market), the G550 4×4² utilizes the series-model G-Class platform as the starting point for an advanced off-road machine featuring advanced portal axles and aggressive body styling.

Ladder-type frame for maximum rigidity and capability

The ladder-type frame found in the G-Class provides the ideal platform for the immense capability afforded by the G550 4×4². Constructed of steel, up to 4mm (.16 in) thick in some areas, the frame requires over 6,400 individual welds to be fully assembled before it is dip-primed (utilizing electrophoresis) and powder-coated. All interior cavities of the frame are then treated with a hot wax for added protection against water, snow, salt and sand.

The frame of the G-Class provides a robust platform that is better suited for off- road use than a unibody, offering ideal protection for the fuel tank, exhaust system and drivetrain if the vehicle bottoms out on an off-road obstacle. When driving on articulating surfaces, the ladder-type frame prevents the body from twisting forces which could severely damage a more conventional unibody.

No modification or reinforcement to the frame found under existing G-Class models was required when building the G550 4×4² despite the adaptation of highly- specialized and capable portal axle system.

Advanced suspension provides traction on demanding terrain

Equipped with dual springs and damper struts, the G550 4×4² has an extremely high range of available spring travel to ensure maximum surface contact even on the toughest off-road terrain. Adjustable-damping shocks are aided by two stabilizer bars ensure a comfortable ride off-road and sporty performance on-road despite a large amount of ground clearance.

Portal axles for increased ground clearance, capability

One of the technical highlights of the G550 4×4² are the portal axles. Unlike a conventional axle, the portal axles found on the 4×4² allow for axle input and the wheel center to be two drastically different heights. By utilizing a series of gears similar to those found in a transmission, power is transferred from the G-Class’
rigid axles downward to the wheel hub.

Portal axles allow suspension geometry, steering connections and drive shafts to remain unchanged from other G-Class models thanks to their ability to keep the position of the rigid axles relative to the chassis unchanged. Load is reduced from all reciprocating components, especially the drive shafts, thanks to the internal gears found in the portal axles. Further, as the speedometer takes a reading from the rigid axles, fitting larger and more aggressive off-road tires does not require a recalibration of the speedometer.

The addition of portal axles has provided a max load ground clearance of over 17″ and has increased track width over a conventional G-Class by over 9″ in the front and 10″ in the rear.

The best just got better: The G550 4×4² is more capable than ever off road

The G500 4×4² offers unprecedented amounts of off-road capability, even in comparison with the G550. Portal axles have afforded the 4×4² the ability to off- road where even heavily-modified off-road vehicles wouldn’t dare thanks to massive ground clearance, fording depth, approach, departure and breakover angles.

G550 G550 4×4²  
Max approach angle 30° 51.6° +21.6°
Max departure angle 30° 43.8° +13.8°
Breakover angle 24° 47.4° +23.4°
Maximum tilt angle 28.4° 28.4° +0°
Ground Clearance (max load) 9.3″ 17.2″ +7.9″
Fording depth 23.6″ 39.4″ +15.8″

Specialized drivetrain offers unparalleled off-roading ability

All G-Class models feature permanent all-wheel drive which has been configured for maximum traction with a 50:50 torque distribution to the front and rear axles. With an advanced 4ETS electronic traction control system, a transfer case featuring three 100% locking differentials and an off-road low-range gear, the G-Class family offers unparalleled off-roading ability.

Low Range mode reduces the center differential gear ratio from 1:1 to 1:2 which allows for slow, more controllable off-road driving, including on steep descents. Low Range mode also helps to reduce strain on various drivetrain components.

By locking front, center and rear differentials in Low Range mode, each wheel will spin at the same RPM, thus directing torque to the wheels which are able to obtain traction. The G-Class is able to move forward even if only a single wheel is able to gain traction.

Powerful 4.0L V8 Biturbo engine

Featuring a 4.0-liter Biturbo V8, the G550 4×4² produces 416 hp and 450 lb-ft of torque for exemplary on-and-off-road performance. This newly developed engine, featuring twin turbochargers located between the cylinder banks, allows for a compact design that easily fits within the G-Class engine bay.

An aluminum-alloy crankcase reduces weight and ensures maximum strength and the cylinder walls feature NANOSLIDE® technology, which creates a surface twice as hard as a conventional cast-iron cylinder liner while simultaneously reducing friction and improving fuel economy.

Power is transferred to all four wheels by way of a 7G-TRONIC PLUS seven-speed automatic transmission. With no interruption in power between gear changes, short shift times and smooth gear changes, on-and-off-road driving is both more comfortable and efficient than was previously possible.

A classic look with modern touches

The exterior design of the G-Class has become an icon in the automotive design landscape, maintaining the original shape with only minor changes since it first became available for consumers to purchase in 1979*. While the G550 4×4² retains the classic G-Class shape, it boasts an even more intimidating appearance with its extraordinary ground clearance and wide track width.

A comfortable, high-quality interior

Inside, the G550 4×4², occupants are treated to all the safety, entertainment and luxury features that have come to be expected of the Mercedes-Benz brand. An 8″ COMAND infotainment system, featuring satellite navigation, is equipped as standard.

The G-Class lineup at a glance

G550 AMG G63 AMG G65 G550 4×4²
MSRP $119,900 (MY16) $139,900 (MY16) $217,900 (MY16) TBA
Length 187.56″ (excl. brush guard)
Width 80.9″ 80.9″ 80.9″ TBA
Height 76.9″ 76.3″ 76.3″ 88.0″
Wheelbase 112.2″
Curb Weight (lbs) 5,724 TBA TBA TBA
Fuel Economy 13 / 14 / TBA (MY16) 12 / 13 / TBA (MY16) 11 / 13 / TBA (MY16) TBA
Engine 4.0L V8 Biturbo 5.5L V8 Biturbo 6.0L V12 Biturbo 4.0L V8 Biturbo
Displacement 3,982 cc 5,461 cc 5,980 cc 3,982 cc
Drive Config. Permanent all-wheel-drive (50:50)
Performance 416 hp @ 5,250 – 5,500
450 lb-ft @ 2,250 – 4,750
563 hp @ 5,500
561 lb-ft @ 1,720 – 5,250
621 hp @ 5,000 – 5,300
738 lb-ft @ 2,300 – 4,300
416 hp @ 5,250 – 5,500
450 lb-ft @ 2,250 – 4,750
0-60 mph (sec) 5.8 5.3 5.2 TBA
Top speed (mph) 130 (electronically limited) 130 (electronically limited) 143 (electronically limited) TBA
Main Competitors Land Rover Range Rover HSE Toyota Landcruiser

The G550 4×4² will be available at US dealers by early 2017.

Scroll to Top