The only other external difference was that the 330 GTS model had a small "330" script badge on the boot lid below the Ferrari script badge, whereas the 365 GTS model had only the Ferrari script badge.
Internally there were small changes to the dashboard and centre console, the most obvious being the addition of two circular directional demister outlets in the centre of the dash top. Like the 330 GTS models, the bodies were
built at the Pininfarina works in Turin, then delivered fully trimmed to Ferrari for fitment of the mechanical components.
The folding roof of the 365 GTS was retained by a pair of over-centre clips on the top screen
rail when in the erected position, whilst a clip-on protective vinyl cover fitted over it when stowed in a recess behind the seats, otherwise it was identical to the sister 365 GTC model. The bodies were mounted on a 2400mm
wheelbase chassis with factory reference numbers 592C, and all were left hand drive and numbered in the odd chassis number road car sequence, in the range 12163 to 12493. The layout was virtually identical to that of the models
replaced, as the only mechanical change that had occurred was in the size of the engine. The standard road wheels were the ten-hole alloy design, as fitted to their predecessor, whilst similarly Borrani wire wheels were
available as an option.
The engine was an enlarged version of that fitted to the 330 GTS, and identical to that used in the 365 GT 2+2 models already in production when the 365 GTS was announced. It was a single
overhead camshaft per bank V12 unit, with factory type reference 245/C, of 4390cc capacity, with a bore and stroke of 81mm x 71mm. It was fitted with a bank of either three twin-choke Weber 40 DFI/5 or 40 DFI/7 carburettors,
with a twin coil and rear-of-engine mounted twin distributor ignition system, to produce a claimed 320hp. The 365 GTS and sister 365 GTC would be the last Ferrari models to be announced with a single overhead camshaft per bank
engine, as although the 365 GT 2+2 model continued in production after them, it had gone into production before them. The 365 GTS shared the same five-speed transaxle transmission, and independent rear suspension layout as the
330 GTS model, and as with all Ferrari cars since the beginning of the sixties, four-wheel disc brakes were fitted, with a cable-operated handbrake to the rear wheels.
The 365 GTS had a very short production run, and
was deleted from the range during 1969, by which time 20 examples had been built, making it one of the rarer models of the period.
- Type front, longitudinal 60° V12
- Bore/stroke 81 x 71 mm
- Unitary displacement 365.86 cc
- Total displacement 4390.35 cc
- Compression ratio 8.8 : 1
- Maximum power 235 kW (320 hp) at 6600 rpm
- Power per litre 73 hp/l
- Valve actuation single overhead camshaft per bank, two valves per cylinder
- Fuel feed three Weber 40 DFI/5 carburettors
- Ignition single spark plug per cylinder, two coils
- Lubrication wet sump
- Clutch single-plate
- Frame tubular steel
- Front suspension independent, unequal-length wishbones, coil springs over telescopic shock absorbers, anti-roll bar
- Rear suspension independent, unequal-length wishbones, coil springs over telescopic shock absorbers, anti-roll bar
- Brakes discs
- Transmission 5-speed + reverse
- Steering worm and roller
- Fuel tank capacity 90 litres
- Front tyres 205 x 14
- Rear tyres 205 x 14